AVRDUDE non sincronizzato
Inviato: 11/10/2016, 0:19
Salve, ho da poco acquistato RandA affascinato dalle molte possibilità di utilizzo. Premetto che ho un pò di esperienza in Linux debian (utilizzo una debian pura su Raspberrypi3) ho provato prima installando il software RandA, nessun errore di installazione, tutti i pacchetti ok ovviamente la questione del Bluetooth disattivato è stato un pò un problema in quanto utilizzo molto il bluetooth comunque riconosce il RandA da windows 10 con l'ide modificato sul giusto percorso di rete.
avvio la compilazione dello sketch
-----------------------------------------------------------------------------------------------------
C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp false
Dimensione del file binario dello sketch:
1.316 bytes (su un massimo di 32.256 bytes)
Start uploading... C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp Fade.cpp false
Start uploader.
Arduino at: //192.168.1.142/Arduino
Start upload command: [C:\Users\3DNaturalDesign\Desktop\IDE4RandA\hardware/tools/avr/bin/avrdude, -CC:\Users\3DNaturalDesign\Desktop\IDE4RandA\hardware/tools/avr/etc/avrdude.conf, -q, -q, -patmega328p, -carduino, -P\\.\//192.168.1.142/Arduino, -b115200, -D, -Uflash:w:C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp\Fade.cpp.hex:i]
Transfered file: /tmp/ArduinoUpload/Fade.hex
Arduino at: //192.168.1.142/Arduino
Arduino at: //192.168.1.142/Arduino
----------------------------------------------------------------------------------------------------
e rimane fermo così...
allora provo da interfaccia diretta ovvero comandando direttamente il Raspberry
apro arduino su debian (sempre quello dell'installazione del suo GitHub)
arduino uno riconosciuto su ttyS0
provo a caricare lo sketch
---------------------------------------------------------
Dimensione del file binario dello sketch: 1.276 bytes (su un massimo di 32.256 bytes)
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x10
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x01
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x10
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x01
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x10
--------------------------------------------------------------
controllando la cartella il file Hex Risulta correttamente trasferito nella directory in entrambi i casi.
ho provato per scrupolo scaricando ed scrivendo l'ultima release completa dell'iso Raspbian per capire dove sbagliavo,
ma il risultato è lo stesso.
Dove Sbaglio?
Grazie a chiunque sappia aiutarmi.
Cleverland
avvio la compilazione dello sketch
-----------------------------------------------------------------------------------------------------
C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp false
Dimensione del file binario dello sketch:
1.316 bytes (su un massimo di 32.256 bytes)
Start uploading... C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp Fade.cpp false
Start uploader.
Arduino at: //192.168.1.142/Arduino
Start upload command: [C:\Users\3DNaturalDesign\Desktop\IDE4RandA\hardware/tools/avr/bin/avrdude, -CC:\Users\3DNaturalDesign\Desktop\IDE4RandA\hardware/tools/avr/etc/avrdude.conf, -q, -q, -patmega328p, -carduino, -P\\.\//192.168.1.142/Arduino, -b115200, -D, -Uflash:w:C:\Users\3DNATU~1\AppData\Local\Temp\build6813734101026822867.tmp\Fade.cpp.hex:i]
Transfered file: /tmp/ArduinoUpload/Fade.hex
Arduino at: //192.168.1.142/Arduino
Arduino at: //192.168.1.142/Arduino
----------------------------------------------------------------------------------------------------
e rimane fermo così...
allora provo da interfaccia diretta ovvero comandando direttamente il Raspberry
apro arduino su debian (sempre quello dell'installazione del suo GitHub)
arduino uno riconosciuto su ttyS0
provo a caricare lo sketch
---------------------------------------------------------
Dimensione del file binario dello sketch: 1.276 bytes (su un massimo di 32.256 bytes)
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x10
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x01
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x10
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x01
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x04
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x10
--------------------------------------------------------------
controllando la cartella il file Hex Risulta correttamente trasferito nella directory in entrambi i casi.
ho provato per scrupolo scaricando ed scrivendo l'ultima release completa dell'iso Raspbian per capire dove sbagliavo,
ma il risultato è lo stesso.
Dove Sbaglio?
Grazie a chiunque sappia aiutarmi.
Cleverland